SUNFREE
Here is some help on supplys
POOL & PARTS PHOTOS
This might clear up any questions you might have
If not please E Mail me
This is a 3/4" Valve for above ground pool system
The T's are 3/4 and the fittings are 1/2 to fit and glue
into the T's. Use 1/2 inch PVC to Couple Pieces
Same thing but left side put together
This shows actual #'s on 3/4 T'.
This shows #S on inserts and couplers for 1/2 inch poly pipe.
1/2 inch poly pipe works great for any application
and is usually less expensive.
For larger plumbing fixtures use larger 1 1/2, 2" T's etc.
and reduce the outlets down to 1/2" 0r 3/4"
I'm always availiable for questions
Thank you
Sincerely
Cary
This is an assembled valve for three runs of pipe
Also showing are poly pipe couplers
and the device to help fill the coils with water
that connects to your garden hose
This is a hose clamp that you will be using to connect
the flexable hose from your above ground pool to the ends of the valve
If you place tar paper or black plastic under
poly pipe weeds won't come up.
This is 2 300 ft. runs of poly pipe in a 10 ft diameter area.
It is best to uncoil the pipe into elm327 itself, and
also wise to put black plastic or tar paper under the coils
to keep grass and weeds from coming through.
Another photo of the coils.
The lines coming from the coils can be buried
to keep everything neat and clean
and the coils can be placed up to
100 feet from the pool pump.
You could cut a shallow trench from the diversified investments coils to the actual pool
cleaning up the look, also, the coils can be up to 100 feet away
from the pool so you could hide them around a corner
As you can see, the pump outlet goes to the bottom end of the valve
and the input back into the pool is connected to the upper end of the valve
This is what a poly pipe coupler (connector) looks like
These are used to connect the poly pipe coils together
This is a male poly pipe connector, you may use something
like this to connect the poly pipe end to the valve
This is a PVC female connector
And a male connector
This is a PVC "T"
Another photo of the basic parts you will be using
Top view of valve and pool hook up
This is a three tier valve. The black tips at the end of each outlet are actually
the ends of special PVC connectors that are designed for the
poly pipe to plug directly into.
Here is some help on supplys